HS2/F1/...

Control for different Punching Systems

o Optimum control for Punching Systems: HKE, HSE, HKL, ECO

o Cycle time: 0,2 ms
o Fast valve switching by „Boosting“
o Mounts on 35 mm DIN rail
o Data interface: RS-232 (Option)
o Option: CAN, Profibus
o Input/Output status indication with LED
o Measuring system: proximity switch or analog
o Option: SSI, Incremental

The device HS2/F1/... (called HS2 in this document) is used to control H+L punching systems ECO. All specific processes of ECO are defined in the firmware of HS2. Thus, the user control (CNC / PLC) does not need to implement these processes. The benefits of this approach are:

o The user saves the effort (time / money) to implement the punching control flow.

o The critical task of punching control is offloaded from the user CNC. HS2 is running at 0,2 ms / cycle !

o The hydraulics of ECO is used in an optimal way - all optimisations are implemented in the HS2 firmware.

Download:
Operating instructions:	HS2/F1/ECO	79-0000-0007-10-man2gb	pdf 378kB
Operating instructions:	HS2/F1/HKL	79-0000-0007-00-man3gb	pdf 257kB
Data sheet:	HS2/F1/HKL	79-0000-0007-00-dsh1gb	pdf 80kB