NUMERIC CONTROL
 |
The Numeric Control CN050 has been designed to equip machines that must be easy to use and provide complete programming data with guided input. For the operator, this means being able to set the optimal working cycle in the shortest possible time with the help of intuitive menus, like the PUI. The high protection makes CN050 ideal for the "toughest" workshop environments. The keys have been designed so that they are touch-sensitive even when the operator is wearing working gloves. Particular care was taken in the selection of the components to ensure brightness and contrast of the display. The CN050 is realzied with UR050. The product can be used in integrated mode ( the control is mounted behind the panel )or in remotated mode, with a maximum distance of 3 mt. UR050 include serial communications, CAN field bus, control of up to 3 axes, 16 digital inputs, 16 digital outputs, and I/O modularity on Tecnos local bus (BLT) or CAN. The CPU used is a Motorola 40 MHz ColdFire. |
|
The Numeric Control CN055 has been designed to equip machines
that must be easy to use and provide complete programming data with guided
input. For the operator, this means being able to set the optimal working
cycle in the shortest possible time with the help of intuitive menus, like
the PUI. The high protection makes CN055 ideal for the "toughest"
workshop environments. The keys have been designed so that they are touch-sensitive
even when the operator is wearing working gloves. Particular care was taken
in the selection of the components to ensure brightness and contrast of
the display. The CN055 is realized with UR055. The product can be used in
integrated mode ( the control is mounted behind the panel )or in remotated
mode, with a maximum distance of 3 mt. The UR055 include serial communications
(RS232 and RS422/485), CAN bus field, control of up to 5 axes, 4 analog
inputs and 2 analog outputs auxiliary and I/O modularity on BLT (Tecnos
Local Bus) or CAN. The CPU used is a Motorola 40 MHz ColdFire. |
 |
The Numeric Control PB05X dedicated to the pressbrake machines and it
has been designed to equip machines that must be easy to use and provide
complete programming data with guided input. For the operator, this means
being able to set the optimal working cycle in the shortest possible time
with the help of intuitive menus, like the PUI. The high protection makes
PB05X ideal for the "toughest" workshop environments. The keys
have been designed so that they are touch-sensitive even when the operator
is wearing working gloves. Particular care was taken in the selection of
the components to ensure brightness and contrast of the display. The PB05X
is realized with UR05X. The product can be used in integrated mode ( the
control is mounted behind the panel )or in remotated mode, with a maximun
distance of 3 mt. UR05X include serial communications, CAN field bus, control
of up to 3-5 axes, and I/O modularity on Tecnos local bus (BLT) or CAN.
The CPU used is a Motorola 40 MHz ColdFire. The CN has one idraulic axis
board and one PWM idraulic servo drive board to assemble separated on DIN
bar. |
AXIS CONTROL
 |
The UR050 device is a remote numerical control designed to
be placed on a DIN bar. The CN include serial communications, CAN field
bus, control of up to 3 axes, 16 digital inputs, 16 digital outputs, and
I/O modularity on Tecnos local bus (BLT) or CAN. The CPU used is a Motorola
40 MHz ColdFire mantaining the compatibility with the others tecnos products
permits future development of machines with the higher-performance ColdFire
family. |
 |
The UR055 device is a remote numerical control designed to
be placed on a DIN bar. The control include serial communications (RS232
and RS422/485), CAN bus field, control of up to 5 axes, 4 analog inputs
and 2 analog outputs auxiliary and I/O modularity on BLT (Tecnos Local Bus)
or CAN. The CPU used is a Motorola 40 MHz ColdFire which mantaining the
compatibility with the others tecnos products permits future development
of machines with the higher-performance ColdFire family. |
 |
UR10 is a numerical control. Its distinguishing features are its modularity,
both regarding the axes (with boards to be inserted in the device) and the
local inputs/outputs (Tecnos BLT modules) controlled via serial line on
proprietary bus, and the possibility to communicate on field bus according
to CANOpen (DS301/401) standard. The device is placed inside the electrical
cabinet on DIN bar. UR10 operates on 24MHz 32-bit Motorola platform. It
is composed of modular axis boards (2 per board) up to a maximum of 6. The
axes can be configured in Line Driver and Open Collector at 5 or 12 Volt.
The I/O section is external with with type 8 module fixed on DIN bar. Connection
to the outside world is assured by two serial lines, one LAN line, and CANOpen
system. |
 |
UR20 is a numerical control dedicated to the pressbrake machine.
Its distinguishing features are its modularity, both regarding the axes
(with boards to be inserted in the device) and the local inputs/outputs
(Tecnos BLT modules) controlled via serial line on proprietary bus, and
the possibility to communicate on field bus according to CANOpen (DS301/401)
standard. The device is placed inside the electrical cabinet on DIN bar.
UR10 operates on 24MHz 32-bit Motorola platform. It is composed of 1 modular
electric axis boards (2 for board) up to a maximum of 4. The axes can be
configured in Line Driver and Open Collector at 5 or 12 Volt. The CN has
one idraulic axis board and one PWM idraulic servo drive board. The I/O
section is external with with type 8 module fixed on DIN bar. Connection
to the outside world is assured by two serial lines, one LAN line, and CANOpen
system. |
 |
The SYNCRO system is available with a single rack unit to
adapt to any machine requirement. It can control up to 10 axes, divisible
in groups (with the possibility of quickly moving an axis from one group
to another) and up to 192+192 inputs/outputs, thanks to a powerful integrated
PLC. It can control axes driven by DC, AC, brushless, linear and hydraulic
motors. A powerful and flexible language, SBL (Syncro Basic Language), allows
fully exploiting the wide range of possibilities to drive gantry axes, synchronised
axes (e.g. for in-flight cutting) and in-position control of axes driven
at 500 m/min with an accuracy of hundredths of a mm, etc. SYNCRO is integratable
with boards for connection to Ethernet and connection to LAN/field bus (Profibus,
CAN, Mechatrolink). Because of its versatility it can also be used in automation
of transfer lines, both in production and assembly. Generally, it is connected
to a PC or operator terminal in order to fully exploit the potential with
a complete man-machine interface. |