Punching / Nibbling
 |
From simple two-axis machines to indexed-tool machines to respond to the need for nibbling speed and punching precision. Tecnos G.A. has moreover developed its own sophisticated sledge hammer control hardware capable of achieving 600 strikes/min. at limited cost. |
Plasma-arc/Oxygen cutting
 |
A sector in continuous growth for Tecnos G.A. Be they machines
with one cutting tool or multitorch/multiplasma machines, they can all be
automated. The versatility of the Syncro system has allowed creating machines
that combine the normal cutting functions with auxiliary functions such
as punching, nibbling, threading, boring, countersinking and milling. Having
developed our own torch height control system, allowed us to create machines
for inclined plasma-arc cutting. In this sector Tecnos G.A. has also been
successful internationally with major new developments. |
 |
Standard Application by Plasma and Flame Cutting is the natural
aim of "Project Plasma" and refers to builders who wish to manageably
set up a numerical control machine designed for the "hot" cutting
of steel, especially if new to the industry. By exploiting a decade of experience
in the field, Tecnos is now able to configure, in real time, the hardware,
software and documentation necessary for carving out a numerical control
adapted to the needs of the customer: from the simplest machine, with two
axes and a torch, to the multitorch/multichannel with gantry axes, built-in
torch height control and remote plasma consoles. The wide range of functions
available covers practically every option currently in demand by the cutting
technology industry. Integrating modular hardware and software guarantees
the system's upgradability, affording the builder a flexible response to
the latest market demands, whilst simultaneously protecting his investment.
Among the system's strong points are its tested and intuitive user interface
and a PLC which, operating from a shared base, can either be used "as
it is" or can be personalised with the latest specific builder functions.
Another strong point of its configurability is the system's wide choice
of operator terminals, allowing the builder to cover segments of the market
with products that will guarantee the best value for money. The ISO programming
language means the NC can be programmed using CAD programs for more widespread
steel. Finally, Tecnos continuous investment in the plasma/flame cutting
field (Project Plasma) guarantees the adoption of the most advanced industry
technologies available. CONFIGURATION The builder chooses the desired configuration from the options available. In just a few minutes, Tecnos produces the necessary elements for a "turnkey" control, responding to the specific needs of the customer with regard to user interface, PLC and Hardware component setup. The result is an NC ready for use on the specifics given, and also forms the base for subsequent upgrades or personalisations. OPTION AVAILABLE Options can relate both to cutting machine operations (therefore specific, such as tool type, number of channels, presence of markers or even a digitally-controlled torch setting) and to user interface auxiliary software modules (e.g. categorisation of cutting parameters, direct control capability from remote consoles, etc.). |
Calendering
 |
A field recently penetrated by Tecnos G.A. Our experience
in hydraulic handling and the low cost of the multi-axis systems allow highly
customised solutions, typical of the world of calendering. |
Form pressing
 |
Another new sector where Tecnos G.A. can count on many years'
experience in hydraulic axis movement. Tecnos G.A aims to cover the sector
with a complete variety of products ranging from simple controls for synchronised
presses with one or two check axes up to sophisticated numerical controls
for ten axes. Again here we have had amazing success on the international
markets. |